have you ever seen something like this???
(it's a picture from 1998!)
and I really don't like it. 'cause a cocktail kit has to be cool and to look good, that's a reason for playing while standing (cocktail drums are part of a players life style in the case of presence on stage)! if I like to get this e drumming feeling then it doesn't matter to stay or sit... so why sould anyone play while standing playing e drums?
the world's first electronic cocktail percussion kit,
-
- Posts: 182
- Joined: Wed Jul 14, 2004 10:23 pm
- Location: arkansas
-
- Posts: 152
- Joined: Fri Oct 10, 2003 10:50 am
- Contact:
it may look goofy
It may not look cool, but don't knock it unless you've tried it. I personally think electric drums are cool. Of course I really shouldn't push my opinion too much here because I did sell my electric drums to buy my cocktail set.
I had a basic electric set called a DTXpress. It wasn't bad, everything could be brought in nice and close and you barely had to move your arms to reach everything. If it wasn't for all those dang cables, electric drums would be just as easy to set up as a cocktail set.
There's really only two main problems with electric drums:
First: Amps are HEAVY! You need one to really play and electric set.
Second: If something goes wrong at a gig, you're screwed. If you break a head on your cocktail set, you change it. If something doesn't work on an electric set, you're forced to swap cables, piezos or triggers, check your 1/4" jacks and all sorts of other stupid stuff that typically involves a special tool that you don't have with you at a gig.
-Joe
I had a basic electric set called a DTXpress. It wasn't bad, everything could be brought in nice and close and you barely had to move your arms to reach everything. If it wasn't for all those dang cables, electric drums would be just as easy to set up as a cocktail set.
There's really only two main problems with electric drums:
First: Amps are HEAVY! You need one to really play and electric set.
Second: If something goes wrong at a gig, you're screwed. If you break a head on your cocktail set, you change it. If something doesn't work on an electric set, you're forced to swap cables, piezos or triggers, check your 1/4" jacks and all sorts of other stupid stuff that typically involves a special tool that you don't have with you at a gig.
-Joe