< Return to Models Index

• 17"x14" 6-ply Keller shell
  
• Bottom edge rounded 45%
  
• Top edge dble cut 45%
  
• 1/4" Mahogany sound board
  
• Non-fixed adjustable snare depth design
  
• Carlton Parallel internal snare assembly
  
• Full length adjustable tension wires
  
• Pearl single 7/8" arm mount for snare
  
• 7"x10" 8 ply Keller shell
  
• traditional 45% edges
  
• bottom edge has snare bed
  
• Pearl die-cast throw w/Yamaha mount
  
• Noble and Cooley die-cast batters
  
• 2.3 mm Triple Flanged bottoms
  
• Large drum is under-lug mounted on Rims

This is the most responsive of the 3 I've built (24"x16" 24"x14" and this 17"x14") and has a very nice bass tone with good separation and no snare rattle with the kick. Also the carlton snare mechanism has given me the best sounding snare to date. The drum is a 6 ply Keller shell with the insides finished in a walnut stain. I've been using Evans G2 on the bottom, fiberskins on the top, no internal muffling. This drum was the first I used a Rims system on and it has made a difference especially in the bass drum resonance.